Packing Contents; Using The Inverter; Using The Inverter With Cigarette Lighter Input (Cla) - Eminent EM3991 Manual De Usuario

Output Power: 230V AC, 50Hz
•
Maximum capacity: 150W, 300W Peak Power (Peak Power: Some devices
•
require more power at start-up compared to the average power consumption of
the device. The EM3991 can handle peak power up-to 300W for a short amount
of time.)
USB port: 5V, 500mA
•

1.2 Packing contents

The following parts need to be present in the packing:
EM3991 12V Inverter with cigarette lighter input (CLA)
•
User manual
•

2.0 Using the inverter

Please check the Watt requirements of the device you wish to use with your EM3991.
Do not use your EM3991 in combination with devices that require more than 150
Watts. Although the EM3991 can handle peak power up-to 300W, the average power
consumption may not exceed 150W. Eminent is not responsible for direct or indirect
damage to equipment that is used with the EM3991, or damage to the EM3991itself
as a result of improper use.
Turn off your EM3991 using the switch on the back, when not in use.

2.1 Using the Inverter with cigarette lighter input (CLA)

Follow the instructions below to use your EM3991 with the cigarette lighter input
(CLA).
1. Check if the Watt requirement of the device you want to use with the EM3991
does not exceed 1500 Watts. (The wattage should be shown on the device you
want to use, or on the power adapter of the device.)
2. Check if the EM3991 is powered off. The red switch on the back needs be set to
the 'Off' position.
3. Take the inverter with cigarette lighter input (CLA). You will notice two cables,
each cable has it's own color.
4. Connect the inverter with cigarette lighter input to the cigarette lighter of your car,
boat, camper or another power source.
5. Connect the device you want to use to the 230V power output of your EM3991.
Do not turn the device on yet if possible.
6. Turn the ignition of your car or boat to the 'On' position using the ignition key.
7. Switch the power button of the EM3991 to the 'On' position. The green power
LED of the EM3991 will be lit.
8. The connected device should receive power. Turn on the device.
8 |
ENGLISH