Publicidad
Idiomas disponibles
Idiomas disponibles
a) Mount the stand to the base (14) by using base thumb screw (8) and base washer (7).
b) Position the fan head motor (15), insert the tilt adjustment bolt (4) through the square hole of the coupling (16) and the
lower hole of tube as shown within the drawing detail view. Fully tighten the tilt range screw (10) which is already located
in the coupling (16). Then fit the tilt adjustment knob (11) onto the tilt adjustment bolt (4) and (lightly) tighten.
c) Insert the tilt range knob (3) through the top hole of the coupling (16), adjust the fan head to the desired position and
firmly tighten tilt range screw (10) and the tilt adjustment knob (11).
Technical Information
Power Rating: 35 W
Service Value: 1,03 (m³/dak.)/W
Fan Sound Power Level: 51,2 // 55,6 // 61,2 dB(A)
Max. Fan Flow Rate: 36,13 m³/min
Stand By Power Consumption: 0 W
Max. Air Velocity: 1,3 // 1,5 // 1,8 m/s
Publicidad
