Installation - Glacier bay FAIRHURST HD67726W-1108D2 Guía De Uso Y Mantenimiento

Installation

1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 2.
□
Shut off the water supply.
□
Insert the faucet body through the hole in the
sink.
A
2
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
□
Place the escutcheon (D) and the gasket (E) on
the bottom of the new faucet assembly (A).
□
Insert the faucet assembly (A) through the hole
in the escutcheon (D).
NOTE: Silicone sealant is required under the gasket (E).
4
A
D
E