Whispbar Fitting Kit K692W Instrucciones De Montaje página 8

EN
Fitting Kit
K692W
Remove plastic screws as shown.
Store items away in a safe place.
Adjust the legs on the crossbar so that they
are positioned equally from the ends of the
crossbar, and the clamps engage firmly on
the body work of the vehicle.
Locate vehicle's fixed points.
Clamps directly to edge of roof under the
doors, pin locates in hole on vehicle on
front clamps
Tighten adjusting screw to 3 Nm (2.2 ft lb)
hand tight.
8