Front Panel Description; Rear Panel Description - PNI Escort HP 8024 ASQ Manual De Usuario

FRONT PANEL DESCRIPTION:

1. 6-pin microphone connector
Increase channel number
2.
3. Decrease channel number
Potentiometer for squelch adjustment – the squelch makes your radio quieter by removing the
4.
background noise. Rotate the potentiometer clockwise to reduce the noise or counterclockwise if you
want to hear even the weakest signals.
ASQ Potentiometer – to increase the ASQ level rotate the potentiometer clockwise, in this case it
5.
reduces the background noise but also the signal level received.
Tip: turn on the station with ASQ turned left.
6. Potentiometer for turing on / off teh radio and for volume adjustment – Turn clockwise to start station
and increase volume. If no signal is received, we suggest you to adjust the squelch (by rotating the SQ
potentiometer counterclockwise) and then the volume to a comfortable level. When switched on from the
volume potentiometer, the radio will store the last channel used.
AM / FM mode select button
7.
Note: The radio works in AM mode only by changing the standard (details on page 6)
8. Multifunctional switch:
"19": emergency channel selection
•
• "CH": se pot selecta canalele 1~40 (according to the selected standard)
• "L": key lock
TX / ASQ LED indicator - During the transmission the LED will be red, and when the ASQ function is
9.
activated, the LED will be green.
10. Signal level indicator – 4-bar indicator to monitor the power of the received / emitted signals
11. LED display – displays the channel number

REAR PANEL DESCRIPTION:

1. Antenna jack
2. 13.8VDC power cable
External speaker jack
3.
ANT
1
4
EXT
13.8VDC
2 3