Technical Information; Possible Installation Options; Conformity / Manufacturer's Declaration; Imprint - Loewe bild 5 oled Serie Manual De Instrucciones

Loewe bild 5 oled
Operating manual 2
Technical information / Possible installation options
Conformity / Manufacturer's declaration / Imprint

Technical information

About the OLED screen
The TV set with OLED screen you have purchased satisfies the most
rigorous quality requirements and has been inspected with respect
to pixel errors.
Despite of thorough care when manufacturing the display, it cannot
be 100% guaranteed that no subpixel defects will occur due to tech-
nical reasons.
Please understand that these types of effects, as long as they are
within the limits specified in the standard (ISO 9241-307, fault class
II), cannot be considered as a device defect in terms of the guarantee.
Organic Light Emitting Diodes are an image technology based on
self-luminous pixels that offer clear benefits in terms of image quality
and performance.
Under certain conditions, persistent, one-sided loads on the OLED
material can result in persistence image faults which are irreversible.
Residual image issues can arise by using static image content over a
longer period, such as static images, subtitles or ticker displays, loop-
ing dia-shows or video sequences, static displays serving as presenta-
tion monitors or with video games, black bars in some screen formats.
These residual image issues are not defects within the meaning of
the warranty.
To minimise such issues, Loewe has developed a special algorithm
for detecting image content.
If static images are displayed for too long, the TV set automatically
switches to a screen-friendly contrast mode. After a new user oper-
ation, the device immediately returns to its normal state. In addition,
menu insertions are gradually reduced or displayed transparently
after one minute.
Under normal viewing conditions, such residual image issues do not
arise.
Information about connected USB hard drives
Switching off the TV set with the mains switch during operation or
an inadvertent disruption to the power supply (e.g., power failure)
can cause damage to the hard disk file system and hence loss of the
recorded broadcasts.
Never ever disconnect the USB storage device from the TV set during
a copy process. Before switching off the set with the mains switch, we
recommend you to switch it to standby mode.
If, contrary to expectation, you are still experiencing problems with the
operation of the hard drive, you can first carry out a test. In addition,
a formatting of the hard disk can be remedy. In the process, however,
all content on the hard disk is deleted. You can find the corresponding
menu items under System settings
disks.
Loewe are not liable for the loss of data on the integrated hard disk
of your TV set. To avoid data loss, we recommend copying important
recordings to an external storage medium.
Software update
It is possible to update the software on your Loewe TV set.
In the software update (package update) all the software releases in
the TV set are scanned and updated as required.
Current software versions can be downloaded from the Loewe Internet
site (see below) and installed on your TV set using a USB stick.
If your TV set is connected to the Internet, the TV set can be updated
directly via the Internet.
For more information on the software update, please refer to the user
handbook which can be downloaded from the Loewe Internet site.
36799003_OM2_bild_5_55-65_OLED_6_00_ML_Buch.indb 17 36799003_OM2_bild_5_55-65_OLED_6_00_ML_Buch.indb 17

Possible installation options

You can use the following Loewe installation options listed for your
TV set.
Do not use any installation options that are not approved for your
TV set.
TV set
bild 5.65
bild 5.55

Conformity / Manufacturer's declaration

In the frequency range 5150 to 5350 MHz, this TV set is restricted to
indoor use in the following countries: Belgium, Bulgaria, Denmark,
Germany, Estonia, Finland, France, Greece, Ireland, Italy, Croatia,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Austria, Poland,
Portugal, Romania, Sweden, Slovakia, Slovenia, Spain, Czech Republic,
Hungary, United Kingdom, Cyprus.
You can find the complete declaration of conformity in the product
selection at:
www.loewe.tv/int/support

Imprint

Loewe
Industriestraße 11
D-96317 Kronach
Control more ... Hard
www.loewe.tv
The information in this document is subject to change without
notice and does not constitute any obligation on the part of
Loewe
All rights including translation, technical modifications and errors
reserved.
Item number/name of the installation option:
72670x00 FS Plate 55_65
73190x00 floor stand 43-65
72815x00 TS Plate
72115x80 WM 67
71391x20 WM Slim / Vesa Size 300
72670x00 FS Plate 55_65
73190x00 floor stand 43-65
72815x00 TS Plate
WM 67
72115x80
71363x00 WM Isoflex 32-55
71391x20 WM Slim / Vesa Size 300
Loewe hereby declares that this product
meets the essential requirements
relevant provisions of Directive 2014/53/EU and all
applicable EU directives.
GmbH Printed in Germany
Editorial date
Loewe
GmbH.
and other
©
GmbH, Kronach
17
21.05.2019 07:44:38 21.05.2019 07:44:38