Velleman CAMCOLMS1 Manual Del Usuario página 5

5. Restart if your computer asks you to.
Apple Macintosh
1. Insert the CD in your computer.
2. Open the folder mac on the CD and copy MicroCapture onto your
computer.
6.2 Starting the microscope
1. Install the microscope on the stand.
2. Use the included cable to connect the device to a USB port on your
computer.
3. Double click the Microcapture icon on your desktop to start the
software.
The software will start and display the image from the microscope.
4. If necessary, use the wheel [2] on the device to adjust focus.
6.3 Capturing an image
•
To capture an image, click the camera icon in the toolbar.
Captured photos are saved automatically and image thumbnails will be
available on the Photo tab on the right of the window for further editing.
6.4 Capturing video
V. 02 – 25/01/2013
CAMCOLMS1
5 ©Velleman nv