iStorage Diskashur PRO 2 Guia De Inicio Rapido página 5

Adding a New User PIN in addition to the Admin PIN
In addition to the Admin PIN, the diskAshur PRO
To create a new User PIN follow the steps below.
1. In Standby State (solid
press and hold down both the 'UNLOCK
and number '1' buttons.
2. Enter your Admin PIN (default
'11223344') and press the
'UNLOCK' button.
3. In Admin mode (solid BLUE
and hold down 'UNLOCK + 3' buttons.
4. Enter your NEW User PIN and press
'UNLOCK' button.
5. Re-enter your NEW User PIN and press
'UNLOCK' button.
6. To exit Admin Mode press the 'LOCK'
button.
Unlocking with either the Admin or User PIN
Unlock with Admin PIN ( PIN +
1. To unlock the diskAshur PRO
GREEN and BLUE LEDs will alternately blink several times and finally changing to a solid
indicating the drive is unlocked and ready to use as Admin.
Unlock with User PIN (
2. To unlock the diskAshur PRO
then enter your User PIN and press the 'UNLOCK' button again.
blink several times and finally changing to a solid
ready to use as the User.
For more features and detailed instructions please refer to the user manual pre-loaded on your new diskAshur PRO
and also available on our website.
2
RED LED),
LED), press
)
as Admin, enter your Admin PIN and then press the 'UNLOCK' button.
2
+ PIN + )
as the User, press the 'UNLOCK' button, all LEDs will blink on and off,
2
can be configured with an independent User PIN.
Solid RED LED will change to blinking
BLUE LEDs.
GREEN and BLUE LEDs blink rapidly together for
a few seconds then to a solid
solid BLUE LED indictaing the diskAshur PRO
'Admin Mode'.
Solid BLUE LED will change to blinking
solid BLUE LEDs.
Blinking GREEN and solid
a single GREEN LED blink and then back to blinking
GREEN and solid BLUE
GREEN LED rapidly blinks for a few seconds then
changes to a solid BLUE
has been successfully created.
Solid RED LED indicates the drive is locked and in
the standby state.
GREEN and
GREEN LED indicating the drive is unlocked and
GREEN and
GREEN and finally a
is in
2
GREEN and
BLUE LEDs will switch to
LEDs.
LED indicating the User PIN
GREEN LED
BLUE LEDs will alternately
2
5