Chronos Manufactures André Belfort 7610 Conquête Manual De Instrucciones Y Garantía página 9

EN
Unscrew the crown by turning it counter-clockwise. Wind the watch by
turning the crown clockwise approximately 30 to 40 turns until the second
hand starts to run. Pull the crown carefully to position 1. Set the watch
to 7 o'clock by turning the crown clockwise. You may set the current day
with button A. With button B you may set the date. Set the current time by
turning the crown clockwise. When finished push the crown carefully back
in to place and bolt it by turning it clockwise. For months with less than 31
days, the date must be changed manually at the end of the month.
Important! Never set the date and/or the day between 8 pm and 4
am. The date changing mechanism is active in this period and any
exterior intervention can damage the movement. If it is necessary
to set the date during that time period, first change the time to any
time outside it, set the date and then reset the correct time. Please
press the button on your watch slowly and carefully to avoid dama-
ging the mechanism. When the warranty of your watch expires, we
recommend you to send it in for a revision to ensure its longevity. A
revision should optimally be conducted once a year to counteract
general wearout and to maintain the water-resistance of your watch.