Specifications - Phonic MAX1000 Manual Del Usuario

SPECIFICATIONS

Stereo Mode (driving both channels)
8Ω EIA 1kHz 0.1%THD
4Ω EIA 1kHz 0.1%THD
Bridge Mono Mode
8Ω EIA 1kHz 0.1%THD
All Models
Output Circuitry
Input Aensitivity @ 8Ω
Distortion (SMPTE-IM)
Noise (unweighted 20Hz-20KHz below
rated output)
Damping Factor
Frequency Response
Input Impedance
Cooling
Connectors (each channel)
Indicators
Controls
Front Panel
Rear Panel
Protection Circuitry
Power Consumption
Power Requirement (depends on region)
Dimensions (WxHxD)
Weight
MAX 1000 | MAX 1500
MAX 1000
Continuous Average Output Power Per Channel
200W
300W
600W
20 Hz-20KHz, +0/-1dB; -3dB points: 5Hz-50KHz
Continuous variable-speed fan, front-to-rear air flow
Input: XLR and 1/4" TRS; Output: Speakon and binding posts
Power: Blue LED; SIGNAL: Green LED; PEAK: Red LED
Slide switches: Operation mode: Parallel, Bridge, Stereo;
Grounding/Floating; Current-Break reset button
600W
10.16 kg (22.4 lbs)
All specifications are subject to change without notice.
| 2500
MAX 1500 Plus
280W
450W
Continuous Average Output Power
900W
Class AB
1.23V (+4dBu)
<0.01%
100dB
>300 @ 8Ω
20 K Ω balanced, 10 K Ω unbalanced
CH1 & CH2 GAIN knobs with 21 detents
Short circuit, thermal, subsonic, RF protection,
Output DC offset, Power on/off muting
900W
100~120VAC, 220~240VAC, 50/60Hz
482 x 88 x 415mm (19" x 3.46" x 15.9")
11.15 kg (24.6 lbs)
MAX 2500 Plus
500W
750W
1500W
Class H
<0.02%
1500W
13.24 kg (29.2 lbs)
7