in-lite MINI SCOPE Manual De Instrucciones página 6

EN
Contents
1x MINI SCOPE 12V/2W
Dimensions Ø 47 mm
1x Ground pin
1x Wall mount
1x Easy-Lock
1x Wall plug (for sealing cable duct)
1x Various fixtures & fittings
Material
Plastic casing
Aluminium ring
Glass lens
Please read the following instructions before installing. You are
advised to keep these installation instructions in a safe place.
Use
Mini spot for highlighting trees or borders, as well as specific areas in
the garden.
Lamp
The fixture is equipped with a high-quality LED lamp. These lamps
have a long life and a high light output and their power consumption
and the heat produced are extremely low.
Important!
Never connect the low-voltage cable directly to a 100-240 V power
source. It is only suitable for use in combination with a 12 V low-voltage
system. This product should only be used within the in-lite system. Use
of products other than those made by in-lite will invalidate the warranty.
Caution! Do not open the spotlight yourself. The warranty is no longer
valid if the seal is broken.
Enjoy the lighting in your yard.