(Sataii_1 (Port0); (Sataii_2 (Port1); Sataii_6 (Port5) - ASROCK K10N750SLI-WiFi Manual Del Usuario

How to install eSATAII?
1. In order to enable the eSATAII port of the I/O shield, you need to connect the
orange SATAII connector (SATAII_6 (PORT5); see p.2 No.12) and the eSATAII
connector (eSATAII_TOP; see p.2 No.38) with a SATA data cable first.
Connect the SATA data
cable to the orange
SATAII connector

(SATAII_6 (PORT5))

2. Use the eSATAII device cable to connect eSATAII device and the eSATAII port of
the I/O shield according to the eSATAII connector that you connect the SATA
data cable.
Connect one end of the eSATAII
device cable to eSATAII device
3 2 3 2 3 2
3 2 3 2
ASRock
SATAII_6 (PORT5)
Connect the SATA
data cable to the
eSATAII connector
(eSATAII_TOP)
Connect the other end of the eSATAII
device cable to eSATAII port of the I/O
shield
K10N750SLI-WiFi Motherboard
eSATAII_TOP