Tabla de contenido
Publicidad
1. Power on the device and connect the USB cable to your computer.
2. Allow the gateway to boot up. This might take up to 30 seconds.
3. Your computer's OS should detect the USB device and install the driver.
4. To enter the gateway's Web interface (WebUI), type
5. Use login information shown in image A when prompted for authentication.
6. After logging in pay attention to the Signal Strength indication displayed in the Mobile widget (image B). To
maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the
best signal conditions.
A.
RF technologies
Max RF power
Power adapter
Mobile antenna
*Order code dependent.
**Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.
DEVICE CONFIGURATION
admin
admin01
TECHNICAL INFORMATION
Radio specifications
2G, 3G, 4G
33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE
Bundled accessories specifications*
Input: 0.4 A@100-240 VAC, Output: 9 VDC, 0.5 A, 4-pin plug
699~868 / 1850~2690 MHz, 50 Ω, VSWR<3, gain** 1 dBi, omnidirectional, SMA male connector
http://192.168.2.1
into the URL field of your Internet browser.
B.
Data connection
State
SIM card slot in use
Bytes received/sent
-50 dBm
Connected
Registered (home); OPERATOR; 4G (LTE)
Ready
348.7 KB / 223.5 KB
Publicidad
Tabla de contenido
