Teknofun 811 364 Instrucciones De Uso

Please read and keep this manual before using the device to ensure safe and proper use.
Technical Specifications:
Adaptor
Input: 100-240V ~ 50/60Hz
0.7A Max / Output: 5V/4A
The wireless charge is compatible with: Samsung Note5, S6 edge+, S7, S7 edge+, S8 and S8+ / Iphone 8 and X.
The wireless charge is also compatible with iPhone 5, 6 and 7 while using the included receiving card.
WARNING : TO PREVENT ELECTRIC SHOCK,
ENSURE THE PLUG IS PROPERLY INSERTED INTO THE SOCKET.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THE APPLIANCE TO RAIN OR MOISTURE.
CAUTION : THIS PRODUCT ISN'T A TOY, KEEP OUT OF REACH OF CHILDREN.
Components and features:
Adaptor
Item number 811 364
INSTRUCTION SHEET
Wireless charge
Output: 5V/1A / Power: 5W
Charging Distance: ≤2-3mm (From the plastic surface)
Charging Efficiency: ≧80%
Receiving card for iPhone
Please make
sure to plug in
the adaptor in
the right hole
(see below)
Pikachu Docking station
≤5mm (With receiving card)
5, 6 and 7
1
2 3
USB Charge (3* ports)
Total Output: 5V/2.5A
Total Power: 12W Max
DO NOT use the wireless
charge with a device
charging with USB.
This receiving card has to be plugged on
your iPhone and must be clamped to the
back of the phone.
If you want to unplug the receiving card
from your iPhone, do it with care as it can
break.
Please note that it's better to keep it at all
times under the case of your phone.
The receiving card is NOT guaranteed.
EN
4
5
1