Cleaning And Maintenance - Remington PRO-Air 2200 Manual Del Usuario

ENGLISH
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. Grille
2. Heat selector switch (N, O, P)
3. Speed selector switch (0, F , E)
4. Cool shot
INSTRUCTIONS FOR USE
1. Wash and condition your hair as normal.
2. Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain flammable material – do not use while using this product.
3. Attach the concentrators or diffuser by fitting it to the front of the hairdryer and
twisting clockwise to lock it.
4. Plug the product into the mains power supply.
5. Switch your hairdryer on and select the desired speed setting (low F or high E) using
the speed selector switch.
6. Select the desired heat setting (low N, medium O or high P) using the heat selector
switch.
7. After use, turn the appliance off and unplug it.
8. Let the appliance cool down before cleaning or storing away.

CLEANING AND MAINTENANCE

• Unplug the appliance and allow to cool.
• To maintain peak product performance and to prolong motor life, it is important to
regularly remove any dust and dirt from the inlet grille.
• To remove the rear grille for cleaning – hold the dryer handle in one hand, then with
the other, place your thumb and index finger on the centre piece of the rear grille.
Twist anti-clockwise and pull the grille away from the dryer.
4
5. Concentrator
6. Inlet grille
7. Hang up loop