5.
Overview
Refer to the illustrations on page 2 of this manual.
1
2
3
6.
Operation
1.
Install the fan on a dry, level and non-slippery surface.
2.
Connect the fan to the mains.
3.
Press the on-off switch to switch on the fan.
4.
Adjust the angle of the fan by moving the head up or down. Be careful not to insert
any fingers into the grille.
5.
Switch off the fan and disconnect from the mains after use.
7.
Cleaning and Maintenance
Before starting any cleaning activities:
1.
Switch off the device.
2.
Unplug the device's power cord from the outlet.
Cleaning
Occasionally clean with a damp cloth to keep it looking new. Do not use harsh
chemicals, cleaning solvents or strong detergents.
Do not remove the front grille unless the fan is switched off and disconnected from the
mains.
V. 01 – 02/07/2018
CFANAM1-B/CFANAM1-PL/CFANAM1-Y
front grille
blade
on-off switch
tilt axis
4
rear grille
5
base
6
5
©Velleman nv