Installation - Costco 1500033 Manual De Instrucciones

INSTALLATION

1. Carefully unpack all items from the box. Place the base in the final position. There must
be a minimum of 60.96 cm / 24 inches of clearance from the side of the table top to any
combustible walls.
2. Place the tabletop on the base. Secure the tabletop to the firepit base using the bolts
and washers that are provided. Put the burner cover protective ring into the tabletop. See
Figure 3.
Figure 3
3. Pour the fire ice into the burner pan completely covering the burner. See Figure 4.
Figure 4
4. Remove the cardboard cover from the ignition well as shown in Figure 5. Remove any
lava rocks or fire ice on top of the ignition well.
Figure 5
CARDBOARD COVER
6