Publicidad
Idiomas disponibles
Idiomas disponibles
• Please observe all the safety rules given below at all times.
• Disconnect from the mains: Ensure that the output power circuit
is free of voltage.
• Secure against switching on again: Ensure that no one acciden-
tally switches on the power again. Mask the fuse so as to prevent
an accidental switching-on again!
• Ensure that there is no voltage: Using a measuring device or a
voltage tester (phase tester), verify that the circuit has no power.
4 Installation
Take the device out of the package and remove all packaging material. Deactivate
the fuse of the power circuit at the place where you want to connect the spot-
light.
1.
Make a hole with the required diameter at the respective location.
2.
Connect the recessed spotlight directly to the mains. You will require a
transformer for this purpose.
3.
Press the clips of the spotlight upwards and insert it into the drilled hole.
English
7
Publicidad
