Altrex MiTOWER Safe-Quick Manual Del Usuario página 8

8. Ballast
Ballast is not required for indoor and outdoor usage up to a maximum wind speed of 7.9 m/s (max. 4 Beaufort*). Please
contact Altrex with regard to use in higher wind speeds.
9. Moving the rolling tower
The rolling tower may only be moved while observing the following conditions:
1. Before moving the rolling tower, the height has to be reduced to a maximum of 6.2 metres.
EN
2. When the rolling tower is moved, persons and/or materials may not remain on the rolling tower.
3. Beforehand, checks should be made that the environmental factors, such as swinging doors, canopies, pits,
automatically functioning awnings, aboveground electrical cables, traffic and/or passers-by, etc. do not lead to dangerous
situations while the rolling tower is moved.
4. In order to move the rolling tower, the stabilisers can only be raised to a maximum of 3 cm.
5. Only move the rolling tower manually in a lengthways direction, over a flat, horizontal and sufficiently load-bearing surface.
6. After moving the rolling tower has to be realigned horizontally using a spirit level.
7. Do not move the mobile access tower if the wind speed exceed 7.9 m/s (max. 4 Beaufort*).
10. Disassembly of the rolling tower
The rolling tower should be disassembled following the instructions for assembly but in reverse order.
11. Inspection, Care and Maintenance
1. Rolling tower parts must be handled and transported with care in order to avoid damage.
2. Storage should be organised in such a way that only undamaged parts, in the correct amounts, are available for assembly
of the rolling tower.
3. Check all moving parts for correct functioning and check that these are not filthy.
4. Check all parts for damage. Damaged, worn-out or incorrect parts may not be used. Replace these parts only with original
Altrex parts. To prevent accidents, these parts must be mounted in the same way as the part that is replaced. Mounting
(fastening) and/or repair are at your own expense and risk. Altrex shall not be liable for damage resulting from erroneous
mounting and/or repair.
5. Rolling towers for professional use must be inspected periodically by an expert.
6. Production code (YY-WW) can be found: braces, on the tubes; frames, on vertical tube; platforms, on inside of beams;
stabilisers, on outer tube.
12. Warranty conditions
Please visit www.altrex.com/warranty to view the clauses of the Altrex warranty.
13. Abbreviations and logos
Abbreviation / logo
WH
PH
KG
KG
L
B
Optional
Indoor use
Outdoor use
Wood
Fiber-Deck®
All rights reserved. No part of this publication may be duplicated, stored in an automated database, or disclosed in any way
or manner, whether electronically, mechanically by photocopying, recording, or in any other way, without prior permission of
Altrex BV Zwolle. This publication may only be used for Altrex products. Misprints and printing errors reserved.
8 www.altrex.com
Meaning
Working height
Platform height
Kilogramme
Length
Width
Optional use
Indoor use
Outdoor use
Wood
Fiber-Deck® light-weight platforms