Operation - Ryobi RMS10SB Manual Del Operador

WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in possible
serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of at-
tachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this tool for the following purpose:
 To provide a stable, secure work surface for a miter
saw
USING THE EXTENSION RAILS
See Figure 10.
Use the extension rails when working with larger work-
pieces.
To extend the rails:
 Loosen the extension adjustment knob.
 Extend the rail to the desired position.
 Tighten the extension adjustment knob.
USING THE WORK STOPS
See Figure 11.
Raise the work stops whenever you need to make repetitive
cuts of the same size. To avoid a greater risk of binding or
pinching, do not use both work stops at the same time.
To raise the work stops:
 Loosen the work stop adjustment knob.
 Raise the work stop to the desired position.
 Tighten the work stop adjustment knob.

OPERATION

EXTENSION
WORK STOP
ADJUSTMENT
KNOB
9 - English
RAIL
WORK STOP
EXTENSION
ADJUSTMENT
KNOB
Fig. 10
Fig. 11