Escalade Sports ping-pong T8674 Manual Del Propietário página 7

11. Attach legs (#19 & 24) to table top with Hex Bolt (#29), two Plastic Washers (#38) and
Locknut (#34). Attach leg brace to Leg Mounting Bracket (#25) with Phillips Head Screw
(#23) and #10-24 Locknut (#44) as shown in Detail 1. Attach leg levelers (#26) to bottom
of the legs (#19 & 24) as shown in Figure 7.
12. Attach Net Plate (#47) as shown in Detail 1A & Detail 1B. Make sure the
Nut Plate is flush with the corner of the table and make sure to use the
top three holes in the nut plates. Note: Nut Plates Mount to one
Table Top Only.
Note: There are no Indentations guides for
the nut plates on the table top.
19
38
29
20
34
44
19- Left Hand
Leg Assembly
Detail 1
Leg Brace
23
25
Detail 1A
5
Flush
47
No screw in
this hole
Flush
7
26
24- Right Hand
Leg Assembly
Figure 7
No screw in
this hole
47
Detail 1B