Connection And Operation - König Electronic KN-HDMICON25 Manual De Uso

Connections:
Front view
Rear view
1) Power connection
2) Connection indication LED
3) HDMI input
4) VGA video output
5) RCA stereo output

CONNECTION AND OPERATION

Before installation, please make sure all devices you wish to connect have been turned off.
1) Connect the HDMI input from the source device to this converter (input cables are optional).
3) Connect the VGA and R/L audio output of this product to the display device.
4) Insert the DC side of the 5 V power supply into this product and then connect the AC side of the
power supply into the wall outlet.
5) Power on all connected devices, select the input of the display device to the VGA channel.
6) The image does not need to be adjusted. This converter will position it automatically.
Note: HDMI to VGA conversion may meet the following compatibility problems
• If the VGA port of the display does not support a refresh rate of 50 Hz, the connected display will
show no image when the HDMI source refresh rate is set to 50 Hz.
• If the VGA port of the display does not support resolutions of 720p, 1080i and 1080p, the connected
display will show no image when the HDMI source is set to 720p, 1080i and 1080p.
• If the connected VGA display does not support interlaced resolutions, it will show no image when
the HDMI source is set to 1080i, 480i or 567i.
3