Antop AT-401 Manual De Instrucciones página 4

1.2.1 Horizontal or Vertical Mounting
Mount hardware horizontally or vertically to the wall. Before attaching hardware back to the
antenna, see Connecting instructions. To attach hardware back to backside of antenna, insert
fastening bolt and turn counter clockwise.
1.3 For Indoor Use, In Attic
Determine location in attic where antenna will be placed. To mount antenna onto a beam or
wall, preferably on the side of the house facing the TV station transmitters, remove antenna
hardware from backside of unit, release fastening bolt by turning clockwise. The antenna can
be mounted horizontally or vertically. Fix the antenna hardware onto the beam or wall with
screws (screws not provided).Before attaching hardware back to the antenna, see Connecting
instructions. To attach hardware back to backside of antenna, insert fastening bolt and turn
counter clockwise.
Pull Down
Clockwise
3
Keyholes
Secure Holes
Pull Up
Counter Clockwise
1.2.1
1.3
Keyholes
Secure Holes