CANCEL &
5
DRAIN
CHILD LOCK
6
CYCLE
7
SELECTOR
POWER
8
You can select options (Half Load, Sanitize, or Delay Start) before starting a cycle. If you change the
cycle after selecting an option, the original cycle is reset.
5
6
7
To cancel & drain a cycle currently running, hold down both the Heavy and
Delicate buttons for three (3) seconds.
This option allows you to lock the buttons on the control panel.
Children will not be able to accidently start the dishwasher by pressing the
buttons on the control panel when this option is selected. We recommend
activating this feature while cleaning or wiping the control panel.
When a cycle is running, you cannot operate the Power button. You can
only operate it when no cycle is running.
Activating/Deactivating - If you want to activate or deactivate this option,
hold down the Rinse and Quick buttons simultaneously for three (3)
seconds.
You can select the appropriate wash cycle depending on the soil level of your
dishes. When a cycle is selected, the indicator for that cycle lights up. If you
want to cancel the selected cycle, press the selected cycle button again.
When pressed, all indicator lights turn on and off and the most recently
finished cycle light lights up.
When the dishwasher is running and a selected cycle is finished, 'End' is
displayed and the power turns off automatically.
8
setting up your dishwasher _9