Publicidad
Idiomas disponibles
Idiomas disponibles
Step 2
Identify the projector's approximate front-to-back center of gravity. Place your hands on each side
of the projector and gently lift it an inch from the surface on which it is resting. Carefully adjust
your grip on the projector until it seems balanced from front-to-back.
Make a mental note of center of gravity.
Identify the projector's approximate side-to-side center of gravity. Place your hands on the front
and back of the projector and gently lift it an inch from the surface on which it is resting. Carefully
adjust your grip on the projector until it seems balanced from side-to-side. Make a mental note
of center of gravity. Place the Projector Assembly on top of the mounting legs with the center as
close as possible to the projector's center of gravity.
Tighten the M6 x 10 hexagon screw in the projector collar assembly
Step 2
Technical Specifications
All measurements are in millimeters.
Attaching the projector plate
Technical specifications
105 mm
Publicidad
