RCA ANT1400 Guia Del Usuario página 3

To connect the ANT1400 directly to your TV:
Built-In
Coaxial Cable
To connect the ANT1400 to a converter box:
Built-In
Coaxial Cable
Converter Box
4
3a
Audio/Video
Cables
b. Coaxial cable connection: Connect a coaxial cable to the antenna input on your
converter box. Connect the other end of the coaxial cable to the antenna input on your
TV.
4. Re-scan for channels on your converter box.
Notes: See your converter box's owner's manual for more detailed connection instructions. For
additional information about setting up your converter box, visit www.keepmytv.com
ANT1400
2
TV
3
ANT1400
2
3b
Coaxial
–or–
Cable
TV
1. Make sure your TV is turned off.
2. Connect the ANT1400's built-in coaxial
cable to the antenna input on your TV.
3. Re-scan for channels on your TV.
1. Make sure your TV is turned off.
2. Connect the ANT1400's built-in coaxial
cable to the antenna input on your
converter box.
3. Connect the converter box to your TV
using either audio/video cables or a
coaxial cable:
a. Audio/Video cable connection:
Connect the video (yellow) and stereo
audio (red and white) cables to the
video and audio outputs on your
converter box. Connect the other ends
to the video and audio inputs on your
TV. Make sure you match the colors
of the jacks on each—yellow plug to
yellow jack, red plug to red jack, and
white plug to white jack.
3