Initial Cleaning - Samsung NZ36R5330R Serie Manual De Usuario

Ocultar thumbs Ver también para NZ36R5330R Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before you start
Location of the surface elements and controls
01
04
06
01 Left Rear
02 Center
(7", 1500 W)
(9"/12", 3000 W)
04 Left Front
05 Right Front
(7", 1500 W)
(9", 2500 W)
07 Hot Surface indicator
14 English
NZ36R5330R_AA_DG68-01139A-00_EN.indd 14
03
02
05
07
03 Right Rear
(6", 1200 W)
06 Control Knob
Knob operation
Press and turn the knob to a desired setting.
Hot surface indicator
Comes on when the unit is turned on or hot to the touch.
Stays on even after the unit is turned off.
The hot surface indicator turns off only when the cooking zone has cooled
down to approximately 150 °F.
Cooking areas
The cooking areas on your cooktop are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
When a control is turned on, you can see a glow through the glass cooking
surface. The element will cycle on and off to maintain the preset heat setting,
even at high settings.
For more information on selecting proper types of cookware, refer to the
section "Using the proper cookware".

Initial cleaning

Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass
cleaner.
WARNING
Do not use caustic or abrasive cleaners. You can damage the surface.
2019-04-19
10:19:14

Publicidad

Tabla de contenido
loading

Tabla de contenido