Options - Samsung WA45T3200A Serie Manual Del Usuario

Operations

Options

Child Lock
Child Lock disables the START/PAUSE button
while the washer is operating. This is to
prevent children from playing with the
washer.
Activating the Child Lock function
Press and hold the Temp. and Water Level
buttons simultaneously for approximately
3 seconds.
• Child Lock disables the START/PAUSE
button while the washer is operating.
• The Child Lock Indicator blinks.
Using the Child Lock function
If the lid is opened when the Child Lock
function is on, "dC" is displayed and an
alarm sounds.
• If the water level in the tub is above the
safe water level, "dC" is displayed on the
LED display and the washer starts to
drain water by force after 30 seconds.
• If the water level in the tub is above
the safe water level and the Child Lock
function is turned on while the lid is
open, "CL" is displayed on the LED
display, even if the washer is turned off,
and the washer drains water by force.
• When Child Lock is on and the washer is
off, if the water in the tub is above the
safe water level and the lid is opened,
"CL" is displayed on the LED display.
No alarm sounds, but the washer drains
the water. When the draining operation
finishes, the power automatically turns
off again.
34 English
• If you activate the Child Lock function
while the washer is running, the Start/
Pause button will not work.
• After the compulsory drain, "CL" blinks
at 1 second intervals and the washer
enters the "CL" mode. (When the washer
is in the "CL" mode, only the Power
button works.)
• To cancel the "CL" mode, turn the power
off and then on again.
• To cancel the "dC" mode, deactivate
the Child Lock function. To deactivate
the Child Lock function, press and hold
Temp. and Water Level simultaneously
for at least 3 seconds.
NOTE
Adding laundry when Child Lock is on
To add laundry, deactivate the Child Lock
function. To deactivate the Child Lock
function, press and hold Temp. and Water
Level simultaneously for at least 3 seconds.
See the "Pause Option" section on page 36
for additional details.
Deactivating the Child Lock function
Press and hold both Temp. and Water Level
simultaneously for approximately 3 seconds.
• When you deactivate the Child Lock
function, the Child Lock indicator is
turned off.
• The Child Lock function prevents
children or the infirm from accidently
operating the washer and injuring
themselves.