Philips HF3532 Manual De Usuario página 7

Ocultar thumbs Ver también para HF3532:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
Problem
The radio does not
work.
The radio produces a
crackling sound.
The alarm went off
yesterday, but it did not
go off today.
I wanted to snooze, but
the alarm did not go off
again after 9 minutes.
The light wakes me too
early.
The light wakes me too
late.
HF3532, HF3531:
I am unable to switch
the midnight light
function on/off.
Solution
If you selected the radio as the alarm sound, the radio may be
defective. Switch on the radio after you switch off the alarm to check
if the radio works. If it does not work, contact the Philips Consumer
Care Centre in your country.
Perhaps you set the volume too low. Increase the volume level.
The radio may be defective. Contact the Philips Consumer Care
Centre in your country.
Sound fades in when the alarm is triggered.
Perhaps the broadcast signal is weak. Adjust the frequency (see user
manual for more information) and/or change the position of the
antenna by moving it around. Make sure you have unwound the
antenna completely.
Perhaps you switched off the alarm function.The alarm icon is visible
on the display when the alarm function is active.
Perhaps you set a volume level and/or light intensity level that is
too low. Set a higher volume level and/or light intensity level in
your wake-up profile (see user manual for more information).
Perhaps there was a power failure. In this case, the appliance goes
back to factory settings. You need to set all functions again.
To snooze the alarm, press the SNOOZE button (HF3510 only),
tap on the front of the Wake-up Light (HF3520 only), or tap on the
top of the Wake-up Light (HF3532, HF3531, HF3521) . If you press the
alarm button, the FM button or the MENU button, the alarm function
will be deactivated.
Perhaps the light intensity level you have set is not appropriate for you.
Try a lower light intensity level if you wake up too early. If light intensity
1 is not low enough, move the appliance further away from the bed.
Perhaps the appliance is positioned at a lower level than your head.
Make sure the appliance is located at a height at which the light is not
blocked by your bed, duvet or pillow. Also make sure the appliance is
not placed too far away.
If you are unable to switch the midnight light on or off, try tapping
faster or slower on top of the device.
ENGLISH
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Hf3531Hf3521Hf3520Hf3510

Tabla de contenido