Kohler K-T97328-4 Guía De Instalación Y Cuidado página 8

Hot
Supply
Notch
4. Connect the Supplies
NOTE: The base has a blue mark and a notch on the cold supply
side.
Apply sealant tape on the ½" NPT hot and cold supply pipes and
thread into the base.
Insert the plug into the base.
Turn on the water supply and check for leaks.
Turn off the water supply.
Secure the guard onto the base with the screws provided.
1240535-2-C
Guard
Screw
Plug
Base
Blue Mark
Cold Supply
8 Kohler Co.