Operation - Livoo DOM392 Manual Del Usuario

Control panel
the running mode indicator light illuminates to indicate which one is selected: Auto, Cool, Dry and
Fan.
Settings button (+) and (-)
Each time the + or - button is pressed, the setting temperature will increase or decrease by 1°C. The
setting temperature ranges from 15°C - 31°C.
Fan function
This button controls the fan speed. Press several times to select the desired fan speed, two options
are available: slow and fast. The indicator for the selected fan speed lights up.
Sleep function
Press this button to enter sleep mode.
LED display
It displays the temperature set in degrees «° C» as well as the automatic timer settings. When the
unit is in Dry or Fan operation mode, the display shows the room temperature.

Operation

Cooling operation mode
• Press the MODE button in a sequence until the cool indicator is lighted.
• Set the desired temperature with buttons (+) » or (-).
• Press FAN button to select the fan speed.
Drying operation mode
Press the MODE button in a sequence until the Drying indicator is lighted.
•
• The setting temperature and fan speed can not be adjusted.The setting temperature and the fan
speed is low.
• Close windows and doors for the best dehumidifying effect.
• Do not install the exhaust duct to the window.
Auto operation mode
Once the "Auto" Operation is selected, The indoor temperature sensor operates automatically
•
to select the desired operation mode with " Cooling" and " Fan"
When the room temperature ≥24 °C， the unit will automatically selcet "cooling" mode.
•
• When the room temperature＜24 °C， the unit will automatically selcet " F an" mode.
Fan operation mode
• Press MODE button in a sequence until the fan indicator is lighted.
• Press the FAN button to select the fan speed.
• The setting temperature can not be adjusted.
• Do not install the exhaust duct to the window.
Timer opearation mode
• When the air conditionner is Off, press Timer button to activate the unit and set Off timer, the Off
indicator light illuminates.
• Press buttons (+) and (-) to set Off timer or On time
• With the unit on, press this button to set off timer.
• With the unit off, press this button to set on timer.
EN 36