Nilfisk Alto SPINTEC 551 UH Instrucciones De Uso página 81

TROUBLESHOOTING
SWIRL MARKS
• Floor not clean.
• Area not properly swept - debris in pad.
• Improper pad for the job.
• Moving the machine too fast.
CIRCLES ON THE FLOOR
• Machine standing still while the pad is running.
FLOOR FINISH REMOVED
• Improper pad... too aggressive.
• Moving the machine too slowly.
MACHINE WOBBLES DURING OPERATION
• Defective pad... one side is more dense than the other.
• Machine left sitting on pad for extended period of time causing pad to "take a set".
• Pad not "seated" properly into pad holder bristles.
• Warped padholder - replace.
MACHINE DOES NOT RUN
• Check plug for proper connection - on machine and at wall outlet.
• Check building circuit breaker.
• Call for service.
TECHNICAL SPECIFICATIONS (as installed and tested on the unit)
Model
Model Number
Electrical
Pad/Brush Speed
Pad/Brush Size
Total Weight (w/cord)
Sound Pressure Level (ISO 11201)
Vibrations at the Hand Controls (ISO 5349-1)
Protection Grade
Protection Class
Type
Aluminum
Electrical / motors / engines - misc
Ferrous metals
Harnesses / cables
Liquids
Plastic - non-recyclable
Plastic - recyclable
Polyethylene
Rubber
revised 4/12
Spintec 551 UH
56380072, 56380076
1,1 kW – 230 V/50 Hz
51 cm (20")
680 kg (90 lbs)
63dB LpA, 3dB KpA
Material Composition and Recyclability
% of machine weight
20%
54%
1500 rpm
1.33 m/s
2
IPX0
% recyclable
94%
86%
9% 100%
9% 43%
0% 0%
5% 0%
0% 0%
0% 0%
5% 0%
FORM NO. 56091011 - Spintec 551 UH - 81