QSC MHV-1090 Manual Del Usuario página 4

QUAD-AMP mode connections- Ensure the mode selector switch is set to QUAD-AMP, connect the low frequency signal to the low
frequency enclosure; connect the mid frequency signal to the mid frequency driver; connect the high frequency signal to the HF termi-
nals on the INPUTS terminal strip; connect the very high frequency signal to the VHF terminals on the INPUTS terminal strip.
Signal Processing
MHV-1090
HF
VHF MF LF
Amplification
VHF
HF
Amplification
MF
LF
Low Frequency Enclosure
4