Holiday living LED-60L-SN-M Guia De Inicio Rapido página 3

60 luces multicolores led en forma de copo de nieve
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USER SERVICING INSTRUCTIONS
TO REPLACE THE FUSE:
1) Grasp plug and remove from the receptacle or other outlet
device. Do not unplug by pulling on cord.
2) Open fuse cover. Slide open fuse access cover on top of
attachment plug toward blades.
3) Remove fuse carefully. Turn plug over to remove fuse.
4) Risk of fire. Replace fuse only with 3 Amp, 125 volt fuse
(provided with product).
5) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
6) Risk of fire. Do not replace attachment plug. Do not remove the safety device (fuse).
Discard product if the attachment plug is damaged.
REPLACING LAMPS FROM LAMP HOLDERS
1) Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on
cord.
2) Unlock the burned out LED lamp by lifting the hook and pull lamp and plastic base straight out
of lamp holder as shown in Fig. 1.
3) Insert the spare LED lamp into the lamp holder in correct direction and lock the hook of lamp
base by pushing lock down into the tab as shown in Fig. 2.
4) Replace lamp with only 2 volt, 0.04 watt or 3.4 volt, 0.068 watt LED type lamps provided with
this product.
CAUTION:
a) Do not exchange the lamp base on the new lamp with the old one or the LED wires may
break.
b) Pull lamp and plastic base straight out of lamp holder.
c) Do not deliberately change the direction of the LED lamp in the lamp holder (always match
the hook to the tab, see Fig. 2).
CAUTION:
This string is rated 4.8 watts (0.04 Amps); do not overload. Connect other lighting strings or
decorative outfits end-to-end up to a maximum of 216 watts (1.8 Amps) total.
If connecting to a lighting string that does not have a wattage rating (found on the tag within 6
inches of the plug), calculate the wattage as follows:
Multiply the current which is on the flag type label located within 6 inches of the plug by 120.
For example, string is rated 120 volts, 60 hertz, 0.02 Amps.
0.02 × 120 = 2.4 watts.
Total amount of wattage that can be connected is 216 watts – 2.4 watts = 213.6 watts.
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0761003

Tabla de contenido