Removing And Replacing The Lift-Off Oven Doors - Signature Kitchen Suite SKSDR360GS El Manual Del Propietario

removing and replacing the
Lift-Off Oven Doors
CAUTIOn
• Be careful when removing and lifting the
door.
• Do not lift the door by the handle. The
handle is not designed to support the weight of
the door and could break.
removing the Door
1
Fully open the door.
2
Unlock the hinge on both sides, rotating them as
far toward the open door frame as they will go.
Soft Closing
Damper
Hinge lock
3
Firmly grasp both sides of the door at the top.
4
Close the door to the removal position
(approximately 30 degrees) which is halfway
between the broil stop position and fully closed.
If the position is correct, the hinge cams will
move freely.
5
Lift door up and out until the hinge cams are
clear of the slots.
Unlock
about 30°
replacing the Door
1
Firmly grasp both sides of the door at the top.
2
With the door at the same angle as the removal
position, seat the indentation of the hinge cams
into the bottom edge of the hinge slots. The
notch in the hinge cams must be fully seated into
the bottom edge of the slots.
Hinge Cam
3
Open the door fully. If the door will not open fully,
the indentation is not seated correctly in the
bottom edge of the slots.
4
Lock the hinges on either side of the door,
rotating them back toward the slots in the oven
frame until they lock.
Soft Closing
Damper
Hinge lock
5
Close the oven door.
Door Care Instructions
Most oven doors contain glass that can break.
CAUTIOn
• Do not close the oven door until all the oven
racks are fully in place.
• Do not hit the glass with pots, pans, or any
other object.
• Scratching, hitting, jarring, or stressing the
glass may weaken its structure causing an
increased risk of breakage at a later time.
MAINTENANCE 89
Bottom
edge of slot
Indentation
Lock