Samsung HW-N650 Manual De Usuario página 27

Ocultar thumbs Ver también para HW-N650:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles


PAIR
Bluetooth
PAIR
SOUND
MODE

Play / Pause
VOL
WOOFER
SOUND
MODE

VOL
WOOFER
Up/Down/
PAIR
Left/Right
SOUND
MODE
VOL
WOOFER
Press the
PAIR button. "BT PAIRING" appears in the Soundbar's display.
You can connect the Soundbar to a new Bluetooth device in this mode by selecting the
Soundbar from the Bluetooth device's search list.
Press the p button to pause a music file temporarily.
When you press the button again, the music file plays.
• Auto Power Down Function
The unit turns off automatically in the following situations.
– D.IN / HDMI / BT / USB Mode : If there is no audio signal for 5 minutes.
– AUX Mode :
– If the Audio (AUX) Cable is disconnected for 5 minutes.
PAIR
– If there is no KEY input for 8 hours when the Audio (AUX) Cable is connected.
(Auto Power Down function can be turned off only in that case.)
– To turn off Auto Power Down function, while in "AUX" mode, press and hold the
p button for 5 seconds. "ON-AUTO POWER DOWN" / "OFF-AUTO POWER
DOWN" appears on the display.
Press Up/Down/Left/Right on the button to select or set functions.
• Repeat
To use the Repeat function in "USB" mode, press the Up button.
• Music Skip
Press the Right button to select the next music file. Press the Left button to select the
previous music file.
• Anynet+ / Auto Power Link
You can turn Anynet+ and Auto Power Link on or off.
Anynet+ and Auto Power Link are turned on and turned off by the Right and Left
buttons respectively.
– Anynet+ : If the Soundbar is connected to a Samsung TV through an HDMI cable,
you can control your Soundbar with a Samsung TV remote control.
Press and hold the Right button for 5 seconds to toggle Anynet+ ON and OFF.
– Auto Power Link : If the Soundbar is connected to your TV through a digital optical
cable, the Soundbar can automatically turn on when you turn on your TV. Press
and hold the Left button for 5 seconds to toggle Auto Power Link ON and OFF.
– Anynet+ / Auto Power Link are set to ON by default.
• ID SET
Press and hold the Up button for 5 seconds to complete ID SET (when connecting to an
accessary item).
Press the indicated areas to select Up/Down/Left/Right.
ENG - 23

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido