Wagan Tech 9990 Manual De Usuario página 6

Heated Shiatsu Massage Cushion by Wagan Tech
OPERATION
1. Place the massager on a suitable seat or backing.
2. Use the elastic straps and the fasteners on the back of massager to secure the massager to
the seat/support. Do not overstretch the elastic straps.
3. Connect the adaptor output to the socket of the massage device.
4. Turn on the massager and select your desired settings. (See further instructions in the
controller diagram.)
5. The massager will switch off automatically after 15 minutes. Please rest the unit for 15
minutes before using it again.
NOTE: When power button is pressed for first-time use, the massage mechanism will
automatically move to the lowest position before starting a massage program. The massage
mechanism will always return to this lowest position after the device has been turned off. If
electrical supply is interrupted, the mechanism will revert to the lowest position when power is
restored.
Controller
Heat Button:
Turns on/off soothing heat function.
Heat cannot be turned on if
massage is not selected.
Seat Vibration Button:
Press to activate seat vibration.
Subsequent presses allows user
to adjust vibration intensity.
Use in Car
• For passenger use only. Driver should not use this device!
• Do not use in cars or automobiles when the ambient cabin temperature exceeds 104º F.
5
Power Button:
To turn on the massage functions,
press the button once. The LED
will illuminate and confirm your
selection.
To turn off the massager, press the
button again. The LED indicator
will blink while the massage
assembly returns to its lowest
position and turns the device off.
Massage Selection Buttons:
Full Back: Massage will target
the entire back.
Upper Back: Massage will focus
on the mid-upper back only.
Lower Back: Massage will focus
on the mid-lower back only.
www.wagan.com
®