Elko EP AirGTW-LNS Manual Del Usuario página 3

Lora gateway lns para redes lorawan
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
ELKO EP, s.r.o.
Palackého 493
769 01 Holešov, Všetuly
Czech Republic
Tel.: +420 573 514 211
e-mail: elko@elkoep.com
www.elkoep.com
Made in Czech Republic
02-32/2018 Rev.: 0
Characteristics
• The LoRa Gateway has the LoRa receiver / transmitter function and the server,
receives / transmits messages Lora and processes it on your own server.
• Server protocol addresses LoRaWAN, management systems and data manage-
ment.
• By default, the server is open and unsecured - it is designed for further customer
integration.
• The Gateway (or BTS - Based Transceiver Station) serves as a tool to create your
own LoRa home network for the Internet of Things.
• It collects requests from end devices, and evaluates them.
• The LoRa Gateway Server can be assigned to thousands of IoT terminal devices
communicating on this network.
• Assignment of end devices is done through a web portal, which then records all
requirements from individual sensors.
• The antenna provides radiation in all directions.
• The gateway is also designed for outdoor use.
• For proper Gateway functionality, you need a connected Ethernet cable and a
permanent 48 V DC / POE power supply.
General instrucions
Internet of Things (IoT)
• The IOT wireless communications category describes the Low Power Wide Area
(LPWA). This technology is designed to provide full-range coverage both inside and
outside buildings, energy-saving and low-cost operation of individual devices. Indivi-
dual networks - Sigfox, LoRa, NarrowBand - are available to use this standard.
LoRa network information
• The network is bidirectional and its communication uses free frequency band.
865 - 867 MHz
India
867 - 869 MHz
Europe
902 - 928 MHz
North America, Japan, Korea
• The advantage of this network is the possibility of freely deploying individual stations
in local locations, thus strengthening their signal. It can therefore be used effi ciently in
company premises or, for example, in local parts of cities.
• For more information on this technology, please visit www.lora-alliance.org.
Cautions for proper operation of the device:
• Products are installed according to the wiring diagram given for each product.
• The device must be registered on the server.
AirGTW-LNS
LoRa Gateway LNS for LoRaWAN networks
Description
1
2
Assembly
LoRa Gateway is attached by brackets to the classic boom or at the top of the mast. The
placement must be such as to have a „free view" in which it does not interfere with other
antennas or metal elements. It is necessary to space apart the diff erent antennas on a
common mast.
Connection
Safe handling
When handling a device unboxed it is important to avoid contact with
liquids. avoid unnecessary contact with the components of the device.
1 / 2
EN
1. Antenna
2. Console
3. Device
4. Connecting to the antenna
5. PoE Ethernet
3
4
5
Connect Ethernet
PoE

Publicidad

Tabla de contenido
loading

Tabla de contenido