GE AHE08 Manual Del Propietario Y Instrucciones De Instalación página 12

Installation Instructions
7. INSTALL CASE IN THE WINDOW
A. Open the window and mark the centerline of
the window stool.
B. Carefully place the case on the window stool
and align the center mark on the bottom
front with the centerline of the stool.
C. Pull the window down behind the top
mounting rail.
NOTE: Do not shut the window so tightly that
movement of the accordion panels is restricted.
D. Select the position that will place the sill
supports near the outermost point on the sill.
Place the short side of the sill supports, on
the case bottom, toward the window. Attach
the sill supports to the case track hole in
relation to the selected position using 2 Type
Do not install this air conditioner
CAUTION
in a window if the bolts do not
contact the window sill.
E.
that the case is installed with a slight tilt to the
will be the correct case slant to the outside.
If the sill support bolts do not
CAUTION
contact the window sill, or if
you have a window without a sill, you must
order accessory kit RAK87 to properly install
this air conditioner. Call 877.959.8688 or visit
GEApplianceparts.com.
12
7. INSTALL CASE IN THE WINDOW
F. Secure the case to
G. Pull the accordion
8. SECURE THE CASE IN THE
A.
B. Cut the foam top window gasket to the
C. Stuff the foam between the glass and the
Long side of
sill supports
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
(CONT.)
the window stool
by using 3 Type D
Sill
support
screws.
panels to each window
sash track. Attach
them on each side to
the window sash and
the window stool using
4 Type C screws.
WINDOW AND INSTALL THE
FOAM TOP WINDOW GASKET
To prevent broken glass or
CAUTION
damage to windows, on vinyl
or other similarly constructed windows, attach
Vinyl
Attach the window locking brackets (one on
each side) with Type C screws.
window width.
window to prevent air and insects from
getting into the room.
Wood
49-7794