Dimensions; Eyewasy Installation - Bradley S19-690 Manual De Instalación

Installation

Dimensions

24³⁄₈"
(619mm)
Eyewash installation
1
Remove the plastic dust plug from the bottom of
the yoke assembly and discard.
Hose spray for S19-690 model only. Do not
attach body wash spray head at this time.
Attach the pressure gauge to
C
the adapter on the pressure
side of the tank with pipe
sealant (by installer).
NOTICE: When attaching the pressure
gauge and hose spray to the tank
outlet, hold the adapter (item 3) with a
wrench to prevent stripping. Failure to
do so may damage the seal and cause
leakage. Max. torque 150 in-lbs.
Bradley • 215-321C Rev. V; ECN 14-05-015
12¼"
(311mm)
6"
(152mm)
34"
(864mm)
26"
(660mm)
Body Wash Spray Head
A
Attach the eyewash yoke assembly
to the tank. Max. torque 150 In-Lbs.
Connect the hose with appropriate
B
pipe sealant (by installer). Do not
use sealant tape.
7/29/2014
S19-690, S19-690LHS
3