Maintenance And Cleaning - Jata Beauty LD85B Instrucciones De Uso

Limador de durezas
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 4
• Use it over the skin area for periods of
2-3 seconds. Move it slowly and do not
press in excess. If you press in excess, the
appliance can stop.
• Work slowly and occasionally check the
smooth level of your skin.
TO CHANGE THE HEAD
• To change the head (2) keep pressed the
removal button (3) (Fig. D) and remove
the head (Fig. E).
• Place the new head and press to leave
it correctly fixed.

MAINTENANCE AND CLEANING

• Use the brush (8) to clean the head.
• You can clean the head by placing it
under the tap for 5-10 seconds. You can
switch on the appliance during this
process (Fig. F).
• For a better cleaning, you can remove
the head (2) and use the brush to clean
the inner side
• Use a slightly damp cloth to clean the
outside of the appliance.
• Do not use in cleaning chemical products
or abrasives, metallic scourers and similar,
which may deteriorate the surfaces.
E N V I R O N M E N T
• Dispose the appliance according
to the local garbage regulations.
• Dispose the batteries according
to the local garbage regulations.
• Never throw away the appliance
or the batteries to the rubbish.
So you will help to the
i m p r o v e m e n t
environment.
• The batteries must not be mixed
with other domestic residues.
P R O T E C T I O N
o f
t h e
12

Publicidad

Tabla de contenido
loading

Tabla de contenido