König Electronic SEC-DUMMYCP10 Manual De Uso página 2

Dummy Alarm Control Panel
Introduction:
Professional looking dummy alarm control panel with a deterring effect. Made of plastic housing and
fitted with a continuously flashing LED indicator.
• We recommend that you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
Specifications:
• Housing: plastic
• IP protection: only for indoor use
• Battery: 2x AA 1.5 V (not incl.)
• Dimensions: 100 × 130 × 33 mm
• Weight: 86 g (batteries not incl.)
Placing the batteries:
1. Open the battery compartment at the backside
of the motion sensor.
2. Place two 1.5 V AA batteries, conforming to the
polarity marking inside the battery
compartment.
Close the battery compartment after placing the
batteries.
Mount the dummy control panel to the wall.
ENGLISH
2