Ashley Signature Design P015-900 Manual Del Usuario página 11

4. Place the glass tube (C) into the top of the
glass tube ring (J).
5. Insert 3 M8 studs (GG) in between
radiation screen (K) and upper radiation
screen (I). Fasten the studs with 3 M8
flange nuts (HH). Then insert 3 M6 studs
(II) between the upper radiation screen (I)
and the upper reflector (A). Fasten with 3
M6 cap nuts (JJ) and 6 6.2* 12 flat
washers (KK) .
6. Place the reflector (A) assembly
made in the previous step onto the
upper supporters (F). Tighten together
with 3 M5*15screws (CC) and 3 5.2
10 washer(DD.)
Note: Be sure to fully tighten.
P015-900
INSTALLATION
Page 11 of 49