Drip Stop; Intelligent Warming Plate; Stay Warm Button - Ninja COFFEE BAR CF092 serie Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Preparing and Using the Ninja Coffee Bar
CAUTION: HOT WATER Do not remove the brew basket or vessel while brewing.
CAUTION: STEAM Do not touch steam vents or the top of the brewer while brewing.
CAUTION: The brew basket is hot after brewing. Always allow the brewer to cool down before cleaning.
Fig. 17

DRIP STOP

NOTE: If the Drip Stop is closed before you begin a
brew, the brewer will notify you with 5 beeps and
the Drip Stop light will be illuminated. Set the Drip
Stop to the open position and select your brew
concentration level.
CAN'T WAIT FOR THAT FIRST CUP TO BE READY?
When brewing a carafe, close the Drip Stop to pause the
brew cycle and pour a cup. Remember to reopen the Drip
Stop to complete the brew. (Fig. 17)
NOTE: If you forget to open the Drip Stop, the Ninja Coffee
Bar will pause the brew, and after 20 seconds it will give
you a friendly audible reminder. After 6 minutes the brew
will be canceled.
CAN'T WAIT FOR THE LAST FEW DROPS?
When the brew cycle is complete, set the Drip Stop to the
closed position to stop dripping from the brew basket.
NOTE: While the Drip Stop is closed the Drip Stop indicator
will light up in the bottom right hand corner of the control
panel.
NOTE: Remember to open the Drip Stop when you're ready
to brew again. If you forget, your Ninja Coffee Bar will give
you a friendly audible reminder.
13
1-877-646-5288
- cont.
®
Fig. 18

INTELLIGENT WARMING PLATE

The Intelligent Warming Plate will automatically turn on
after a full or half carafe size of Classic or Rich brew. The
Intelligent Warming Plate will adjust the heat it produces in
order to avoid burning the coffee over time.
CAUTION: The HOT SURFACE light will illuminate
when the warming plate is hot. Do not touch the
surface when this light is illuminated.

STAY WARM BUTTON

Press the Stay Warm button after the brew to turn the
Intelligent Warming Plate off. You can turn the Intelligent
Warming Plate back on within 2 hours of the brew by
pressing the Stay Warm button again if desired. (Fig.18)

Publicidad

Tabla de contenido
loading

Tabla de contenido