Video Mode - T'nB SPCAMWIFI Manual Del Usuario

VIDEO mode

To record a video, make sure that the camera is in video mode.
If the Video icon
times until it appears.
To start recording :
Press
indicator lights blink during the recording, a red dot also appears on the LCD screen.
To stop recording :
Press
indicator lights stay on, but do not blink, the recording is then interrupted.
34
_Notice_SPCAMWIFI_Complet.indd 34
VIDEO
is not displayed on the LCD screen of your camera, press
and release the pressure. The camera emits a beep and the red and green status
and release the pressure. The camera emits a beep and the red and green status
VIDEO mode display
Without recording
(no red dot)
00:00:00
1080P
VIDEO mode display
During recording
(appearance of a blinking red dot)
00:00:00
1080P
multiple
30/04/2015 10:23