Marq UV BAT18 Guia Del Usuario página 2

User Guide (English)
Introduction
Box Contents
UV BAT18
Power Cable
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit marqlighting.com.
For additional product support, visit marqlighting.com/support.
Safety Notes
Important: In addition to the notes below, please refer to the included safety & warranty manual for
additional safety information.
•
Use this product indoors only (IP20). To prevent risk of fire or shock, do not expose this product
to rain or moisture.
•
Connect this product to grounded and protected circuits only.
•
Always disconnect it from its power source before cleaning or replacing this product's fuse.
Replace the fuse with another of the same type and rating.
•
Before connecting the product to a power source, make sure the power cable is not crimped or
damaged.
•
Make sure the power outlet's voltage is within the range stated on this product (on its housing or
decal).
•
Never disconnect this product from the power cable by pulling or tugging on the cable itself.
•
Do not use this product at ambient temperatures higher than 104 °F / 40 °C.
•
Do not allow flammable materials near this product during use.
•
If you encounter a serious problem while using this product, stop using it immediately.
•
Do not open this product's housing. It contains no user-serviceable parts and will void your warranty.
2
User Guide
Safety & Warranty Manual