Panel Description - Palmer PECOMP Manual De Usuario

pANEL DESCRIpTION

1
LEVEL CONTROL
This adjusts the outpit level of the compressed signal.
2
ATTACk CONTROL
This adjusts the amount of delay before compression sets in. Full
clockwise is a slower attack, full counter-clockwise is a faster
attack.
3
SUSTAIN CONTROL
This adjusts the amount of dynamic range limiting. Full clockwise
will produce more sustain.
4
LED
When lit the pedal is switched on. Also serves as a battery level
indicator.
5
ON/OFF SwITCh
This determines whether the pedal is active or bypassed.
6
IN
Use a quality instrument cable with 1/4" jacks to plug your guitar
into this jack socket.
7
OUT
Use a quality instrument cable with 1/4" jacks to connect this out-
put to the input of your guitar amplifier, or the next stomp box in
the signal chain.
10