WamBlee W835 Manual Del Usuario página 59

11.
Once the configuration is ready, the information must be
transferred to the receiver. For this operation proceed as
follows:
(a)
make sure the connection between receiver and Personal
Computer via the UART port (or USB adapter cable <→
UART).
(b)
Make sure of the correct communication port (you can
change it from the 'Option' menu).
(c)
Turn on the receiver.
(d)
Press the 'Send' button on the program window within 10
seconds of turning on the receiver.
(e)
If the operation has taken place correctly, the following
EN
59