Controls And Display - Cameo CLCONTROL6 Manual De Usuario

CONTROLS AND DISPLAY:

4
1
CHANNEL FADERS 1 TO 6
When the faders are all the way down, the lowest DMX value (0%) is output; when the faders are all the way
up, the highest DMX value (100%) is output.
2
MASTER FADER
Channels 1 to 6 are ganged on this fader, which means that the master fader controls the output of all 6 DMX
channels.
3
POWER LED
Lights up when the DMX controller is on, the low-voltage connector of the power adapter is inserted in the
equipment correctly, and the power adapter is connected to the power mains. The LED also lights up during
battery-powered operation.
4
MOUNTING HOLES
The 4 mounting holes can be used to fasten the DMX controller securely during installation (installed dimen-
sions W x H x D 148 x 128 x 52 mm).
8
3
1
2