Cabinet Installation - KENMORE ELITE 580.77107710 Manual De Uso

Insert the top and bottom rails of the curtain panels
5
into the upper and lower panel guides.
Upper Guide
Left Curtain Panel
Lower Guide
CAUTION
The lower panel guides are easily broken. Be careful
with them when installing the cabinet.
Fasten the curtain panels to the unit with 8 type A
6
screws.
Screws (Type A)
INSTALLATION INSTRUCTIONS
Right Curtain Panel

Cabinet Installation

Center Line
1 ¼" max.
Open the window. Mark a line on the center of the
1
inside sill.
Carefully place the cabinet in the window and align
the center hole on the cabinet bottom front with the
center line marked on the window sills.
Pull the bottom window sash down behind the upper
2
guide until they meet.
NOTE: Do not pull the window sash down so tightly
that the movement of the curtain panels is restricted.
Loosely assemble each sill support.
3
NOTE: If the distance to the outer window sill is not
that deep, you may not need the bolt and nut.
9
Inside Sill
Outside Sill
Inside Sill
Center Hole
Window Sash
Upper Guide
Sill Support
Nut
Bolt